print
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
print [2014/10/08 08:27] aphelp6 created |
print [2014/11/26 18:24] (current) aphelp6 |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== LUG 3D Printer User Group ====== | + | ====== LUG 3D Printer User Group (/dev/print) ====== |
| This group exists to learn about 3D Printing technology and administrate the LUG's 3D Printer. | This group exists to learn about 3D Printing technology and administrate the LUG's 3D Printer. | ||
| - | Meetings will be announced soon. | + | Next meeting: Tuesday December 2, 2014 at 5:30pm in SELE 2264. |
| + | ==== Equipment ==== | ||
| + | |||
| + | * [[https://store.makerbot.com/replicator2x|Makerbot Replicator 2X]]: 3D Printer | ||
| + | * [[https://store.makerbot.com/digitizer | Makerbot Digitizer]]: 3D Scanner | ||
| + | * Microsoft Kinect: Used for larger scale 3D scans. | ||
| + | |||
| + | ==== Software to Learn ==== | ||
| + | * [[http://replicat.org|ReplicatorG]]: Ready Models for print. | ||
| + | * [[http://www.makerbot.com/makerware-for-digitizer|Makerware for Digitizer]]: Scan using the digitizer]] | ||
| + | * [[http://skanect.occipital.com/|Skanect]]: Scan using the Kinect. | ||
| + | * [[http://www.freecadweb.org/|FreeCAD]]: Sufficient free 3D modeling software. | ||
| + | |||
| + | ==== Models ==== | ||
| + | * [[http://www.thingiverse.com/thing:508306|Hippocopter]] | ||
| + | * [[http://www.thingiverse.com/thing:509659|Crossbow]] | ||
print.1412756843.txt.gz ยท Last modified: 2014/10/08 08:27 by aphelp6
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
