User Tools

Site Tools


robot

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
robot [2013/11/22 02:32]
jgensler8
robot [2014/03/06 18:06]
aphelp6
Line 1: Line 1:
 +======= Tamiya Bot =======
 +
 +
 root@strawberry root@strawberry
  
Line 4: Line 7:
  
 Initialize/​Remove a gpio connection: Initialize/​Remove a gpio connection:
-  * echo <pin number> into "/​sys/​class/​gpio/​export"​ to create a gpio connection with pin <​pin ​numebr>.+  * echo <pin number> into "/​sys/​class/​gpio/​export"​ to create a gpio connection with pin <​pin ​number>.
   * echo <pin number> into "/​sys/​class/​gpio/​unexport"​ to remove an existing connection   * echo <pin number> into "/​sys/​class/​gpio/​unexport"​ to remove an existing connection
  
Line 11: Line 14:
   * echo ("​1"​|"​0"​) into "/​sys/​class/​gpio/​gpio<​pin number>/​value"​ to turn (on|off) a port   * echo ("​1"​|"​0"​) into "/​sys/​class/​gpio/​gpio<​pin number>/​value"​ to turn (on|off) a port
  
-links:+=====Test 1:===== 
 +  * Raspberry Pi + Arduino, GPIO test light blink 
 +{{:​test_1_rpi_arduino.jpg?​200|}} 
 +  * arduino hookup 
 +{{:​test_1_arduino.jpg?​200|}} 
 +  * rasberry hookup 
 +{{:​test_1_rpi.jpg?​200|}} 
 + 
 +=====Test 2:===== 
 +**SoftwareSerial to ttyAMA0. Here is the** [[code]]. 
 +  * Raspberry Pi 
 +{{:​rpi_test_2.jpg?​200|}} 
 +  * Arduino 
 +{{:​2014-01-31_18.22.57.jpg?​200|}} 
 + 
 +=====Test 3:===== 
 +Code for the Servo and Sensor is [[robotservosensor|here.]] 
 +======links:======
   * serial connection: http://​elinux.org/​RPi_Serial_Connection   * serial connection: http://​elinux.org/​RPi_Serial_Connection
   * RPi gpio chart: http://​elinux.org/​RPi_Low-level_peripherals#​GPIO_hardware_hacking   * RPi gpio chart: http://​elinux.org/​RPi_Low-level_peripherals#​GPIO_hardware_hacking
 +  * ICSP (+other digital charts for Leonardo):​http://​www.instructables.com/​id/​Step-by-Step-Guide-to-the-Arduino-Leonardo/​
 +  * SPI R/W from arduino (UNO, in depth) http://​www.gammon.com.au/​forum/?​id=10892
 +  * ICSP (explanation,​ more general) http://​tronixstuff.com/​2011/​05/​13/​tutorial-arduino-and-the-spi-bus/​
 +
 +====== iRobot ======
 +
 +[[http://​www.irobot.com/​hrd_right_rail/​create_rr/​create_fam/​createFam_rr_manuals.html]]
  
 +[[https://​github.com/​mgobryan/​pycreate]]
  
 +Working on this --> [[https://​github.com/​neofu50/​python-irobot-create]]
  
robot.txt · Last modified: 2014/03/06 18:06 by aphelp6