print
Table of Contents
LUG 3D Printer User Group (/dev/print)
This group exists to learn about 3D Printing technology and administrate the LUG's 3D Printer.
Next meeting: Tuesday December 2, 2014 at 5:30pm in SELE 2264.
Equipment
- Makerbot Replicator 2X: 3D Printer
- Makerbot Digitizer: 3D Scanner
- Microsoft Kinect: Used for larger scale 3D scans.
Software to Learn
- ReplicatorG: Ready Models for print.
- Makerware for Digitizer: Scan using the digitizer]]
- Skanect: Scan using the Kinect.
- FreeCAD: Sufficient free 3D modeling software.
Models
print.txt · Last modified: 2014/11/26 18:24 by aphelp6
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
